Deutsch DT04-3P-C015 3-Pin Plug Housing
3 PinsIP6813A
3-position plug housing for Deutsch DT series sealed connectors. Rated 13A at 250V with IP68 protection. Ideal for single-coil solenoid valves and relay coil power for hydraulic ma
3-way sealed connectorSealed against high-pressure jets
13A @ 250VDeutsch-grade solid contacts
Mates with DT06-3SDrop-in compatible
Technical Specifications
| Contact Size | Size 16 |
| Number of Contacts | 3 |
| Rated Current | 13A |
| Rated Voltage | 250V |
| IP Rating | IP68 |
| Operating Temperature | -55°C to +125°C |
| Wire Gauge Range | 14-20 AWG |
| Locking Type | Push-pull |
| Housing Type | Plug |
Key Features
- Environmentally sealed to IP68 for dust and water ingress protection
- Integrated silicone grommet seal maintains sealing across the rated wire gauge range
- Accepts Size 16 solid Deutsch contacts (sold separately)
- Push-pull locking mechanism provides positive engagement and audible mating confirmation
- Mates directly with Deutsch DT06-3S receptacle/plug counterpart
- Suitable for agricultural chemical exposure in field equipment
- Suitable for off-highway equipment exposed to dust and water splash
Applications
- Industrial Automation
Drawing & Dimensions
Deutsch DT04-3P-C015 3-Pin Plug Housing
Part of Deutsch’s widely deployed DT series, the DT04-3P-C015 provides a 3-position plug interface rated to IP68 for sealed-cavity applications. Engineered for 13A continuous current at 250V and operating temperatures from -55 °C to +125 °C, the housing accepts Size 16 solid contacts (sold separately) and is rated to IP68 for dust ingress and continuous water immersion.
Typical Applications
The 3-position configuration is commonly specified for single-coil solenoid valves and relay coil power for hydraulic manifolds, as well as low-speed CAN bus terminations in body controllers and lighting modules. Its combination of sealed construction and 13A continuous current capability makes it a versatile choice for both power and signal circuits.
Mating and Integration
The DT04-3P-C015 mates directly with the DT06-3S on the opposite harness side, providing a fully sealed in-line connection. Push-to-seat solid contacts are crimped to the wire, then inserted into the housing from the rear until they lock into the cavity. A secondary lock wedge (where applicable to the DT series cavity arrangement) provides positive contact retention.
Where It Is Deployed
The part is widely adopted across mining haul trucks, drilling equipment, and underground loaders, as well as military and specialty vehicle platforms requiring ruggedized interconnects. The IP68 sealed design tolerates engine-bay heat, under-chassis water splash, and chemical exposure typical of these environments.
Why Specify This Part
GSCONN supplies genuine Deutsch DT series housings with full traceability and same-day shipping on stocked SKUs.
