Deutsch DT06-2S-EP04 2-Socket Receptacle Housing
2 PinsIP6813A
2-position receptacle (socket) housing for Deutsch DT series sealed connectors. Rated 13A at 250V with IP68 protection. Ideal for low-current DC power feeds for position sensors.
2-pin sealed interface1m water immersion rated
13A @ 250VCrimp-to-cavity solid contacts
Mates with DT04-2P-E005Complete sealed circuit
Technical Specifications
| Contact Size | Size 16 |
| Number of Contacts | 2 |
| Rated Current | 13A |
| Rated Voltage | 250V |
| IP Rating | IP68 |
| Operating Temperature | -55°C to +125°C |
| Wire Gauge Range | 14-20 AWG |
| Locking Type | Push-pull |
| Housing Type | Receptacle |
Key Features
- Environmentally sealed to IP68 for dust and water ingress protection
- Integrated silicone grommet seal maintains sealing across the rated wire gauge range
- Accepts Size 16 solid Deutsch contacts (sold separately)
- Push-pull locking mechanism provides positive engagement and audible mating confirmation
- Mates directly with Deutsch DT04-2P-E005 receptacle/plug counterpart
- Compatible with Deutsch wedge-lock secondary contact retention
- Compatible with Deutsch standard solid contacts for reliable switching
Applications
- Industrial Automation
Drawing & Dimensions
Deutsch DT06-2S-EP04 2-Socket Receptacle Housing
Engineered to Deutsch’s DT series specification, the DT06-2S-EP04 is a 2-position receptacle housing built for harsh-environment electrical interconnects. Engineered for 13A continuous current at 250V and operating temperatures from -55 °C to +125 °C, the housing accepts Size 16 solid contacts (sold separately) and is rated to IP68 for dust ingress and continuous water immersion.
Typical Applications
The 2-position configuration is commonly specified for low-current DC power feeds for position sensors, level switches, or auxiliary lamps, as well as engine block heaters, block-mounted senders, or basic on/off power drops. Its combination of sealed construction and 13A continuous current capability makes it a versatile choice for both power and signal circuits.
Mating and Integration
The DT06-2S-EP04 mates directly with the DT04-2P-E005 on the opposite harness side, providing a fully sealed in-line connection. Push-to-seat solid contacts are crimped to the wire, then inserted into the housing from the rear until they lock into the cavity. A secondary lock wedge (where applicable to the DT series cavity arrangement) provides positive contact retention.
Where It Is Deployed
Typical deployments include renewable-energy battery storage and utility-scale inverter cabinets, as well as agricultural tractors, combines, and planters. The IP68 sealed design tolerates engine-bay heat, under-chassis water splash, and chemical exposure typical of these environments.
Why Specify This Part
All housings are 100% dimensionally inspected to ensure proper mating with corresponding DT-series counterparts.
