FEATURED ARTICLE
Screw vs Spring Clamp vs Push-in Terminal Blocks
Compare screw, spring-clamp and push-in terminal blocks by wiring speed, vibration, conductor type, maintenance, cost and application.
Read More →Connector Knowledge & Technical Articles
Expert insights, guides, and engineering resources to help you design reliable connections for any application.
All Articles
Terminal Blocks
Screw vs Spring Clamp vs Push-in Terminal Blocks
Compare screw, spring-clamp and push-in terminal blocks by wiring speed, vibration, conductor type, maintenance, cost and application.
Read More →
Terminal Blocks
UL 1059 vs IEC 60947-7-1 for Terminal Blocks
Compare UL 1059 and IEC 60947-7-1 terminal block approvals, ratings, markings and selection steps for North American and international equipment.
Read More →
Terminal Blocks
Terminal Block Wire Size Guide: AWG, mm² and Ferrules
Choose the correct terminal block for solid, stranded and ferruled conductors. Compare AWG and mm², strip length, ferrules and twin-wire rules.
Read More →
Terminal Blocks
PCB Terminal Block Soldering: TH, THR and SMT Guide
Compare through-hole, selective, pin-in-paste THR and SMT soldering for PCB terminal blocks, with process checks and common defect fixes.
Read More →
Terminal Blocks
How to Select a Terminal Block: Engineer’s Guide
Select terminal blocks by connection type, conductor, current, voltage, pitch, mounting, environment and approvals with a practical engineering checklist.
Read More →
Terminal Blocks
Terminal Blocks for Industrial Control Cabinets
Plan terminal blocks for PLC I/O, sensors, motor circuits, PE, fused circuits and power distribution in industrial control cabinets.
Read More →
Connector Basics
Why USB Keeps Disconnecting: Fix Guide
Find the cause of intermittent USB disconnects with a practical isolation workflow covering cables, ports, power limits, drivers, EMI and vibration.
Read More →
Connector Basics
USB-C Not Charging: Troubleshooting Guide
Diagnose USB-C charging failures by checking the cable, PD profile, e-marker, port contacts, temperature, battery and device-side faults.
Read More →
Connector Basics
Box Header vs Pin Header: When a Shrouded Connector Is Worth It
Box Header vs Pin Header: When a Shrouded Connector Is Worth It A box header is essentially a pin array surrounded by a molded shroud. That extra housing increases footprint and cost, but it can also protect contacts, guide mating, support polarization and provide a latch. The right choice depends less on the electrical schematic […]
Read More →