6.35mm vs 3.5mm Jacks for Professional Audio: When to Step Up
Larger contact area, higher retention, tolerance to side load from heavy cables. Where the quarter-inch jack is required rather than preferred.
Read More →Technical articles tagged Contact Force: selection guidance, design rules and field data for Contact Force connectors.
Larger contact area, higher retention, tolerance to side load from heavy cables. Where the quarter-inch jack is required rather than preferred.
Read More →
Larger contact area, higher retention, tolerance to side load from heavy cables. Where the quarter-inch jack is required rather than preferred.
Read More →
A smaller jack is not a scaled-down one. Half the contact area changes retention, current capacity and wear rate disproportionately.
Read More →
Why a SIM socket cannot serve a payment terminal, how landing contacts remove sliding wear, and what plating a 100,000-cycle design needs.
Read More →
A short beam is a stiff beam. What 0.2 mm of height costs in contact force tolerance, insertion effort and joint fatigue.
Read More →
Why a datasheet contact resistance figure without a test method is meaningless, and how to write a requirement that survives qualification.
Read More →
Design reliable pogo pin interfaces by checking working travel, tolerance stack-up, contact force, current, mating pads and cycle-life evidence.
Read More →